Yachts for sale / Coastal Craft 33 ProFish

2020 Coastal Craft 33 ProFish

Anacortes, WA, US 39 ft · 10.92 ft' beam 2 cabins 40 kn kn top
Asking
$649,000
Our Thoughts

The 2020 Coastal Craft 33 ProFish represents a thoughtfully engineered midsize sport fishing vessel that balances genuine offshore capability with refined coastal cruising comfort. Built by Coastal Craft Yachts of Gibsons, British Columbia—a builder known for hand-finished marine welded aluminum construction and performance-focused design—this 39-foot fishing platform delivers the practical engineering and build quality that serious boaters expect from a West Coast fishing boat.

Power, Performance & Handling

Twin Mercury 400XXL/CXXL Verado outboards rated at 400 horsepower each provide the propulsion backbone, delivering a cruising speed of 33 knots and a maximum speed of 40 knots. The outboards are fully rigged with controls and gauges, and paired with Sharrow Marine MX propellers engineered for efficiency and responsiveness. Optimus 360 Joystick Docking with dual-station capability simplifies close-quarters maneuvering, while Zip Wake trim tabs (450mm) and active trim integration through Mercury Vessel View give the helmsman precise control over attitude and running angle. The Shockwave S5 marine suspension base at the helm seat absorbs impact and reduces fatigue during extended time underway—a practical addition for serious fishing or cruising operations.

The aluminum hull construction—marine welded and polyurethane foam insulated—provides the strength-to-weight characteristics Coastal Craft is known for, while a 330-gallon fuel capacity and 66-gallon fresh water tank support extended range. A 2.17-foot draft and 10.92-foot beam make the vessel manageable in shallow bays and tight anchorages common to Pacific Northwest fishing grounds.

Navigation & Electronics

The electronics suite reflects a modern, layered approach to situational awareness. The main helm features dual Garmin 8616 marine chartplotters, a Garmin GMR Fantom 18 radar, Garmin Reactor 40 autopilot, and a Garmin VHF 315 with GHS11 microphone. Airmar thru-hull transducers (50kHz and 200kHz) feed sonar data to the plotter network. A third Garmin 8416 chartplotter is positioned in the aft cockpit for backup or crew awareness, with a 4-inch MercView screen at the Optimus docking station. This redundancy and multi-station architecture supports both fishing and cruising operations, allowing crew to monitor course, depth, and structure from multiple vantage points.

Fishing & Cockpit Design

The aft cockpit spans 9 feet 6 inches long by 8 feet 6 inches wide—a functional working platform for live-bait, jigging, or trolling. Starboard and port side tackle lockers provide dedicated storage, while a self-bailing cockpit with deck scupper drains keeps the working area clear during rough conditions. A 12-inch transom extension with integrated drains adds freeboard and wet-weather protection. Burnewiin fishing accessories include two GM650 stainless steel universal flush deck mounts, a cutting board with GM400 composite mounts, and a Quality Northwest pot puller on a Burnewiin UM6080 mount—practical additions for anglers targeting bottom fish or crab. An aluminum 7-rod Rocket Launcher mounted on the cabin roof accommodates multiple lines, and two downrigger power points serve trolling operations. Raw water and fresh water wash-down systems help maintain

Provided listing description Click to read the original broker text

2020 Coastal Craft 33' ProFish Powered by Twin 400hp Mercury Verado Outboards! Beyond its clear capacity as a fishing machine, this 33' exemplifies the design and dedication to performance that Coastal Craft Yachts of Gibsons B. C. is so well known for. The quality of the hull and structure is clear to see (and especially apparent underfoot). The interior layout is timeless, comfortable, and useful. Her systems are practical, and her equipment is extensive, and all features improve time on the water for operator and crew. Equipped with Garmin Electronics, SeaKeeper 3 Gyro Stabilization, Burnewiin Fishing Accessories, Sharrow Marine MX Propellors, Optimus 360 Joystick Docking, Zip Wake Trim Tabs, Shockwave S5 Marine Supsension at Helm Seat, and So Much More!

2020 Coastal Craft 33 ProFish: Premium Aluminum Sport Fishing Yacht with Twin Mercury Verado Outboards
Overview
The 2020 Coastal Craft 33 ProFish represents a refined approach to midsize sport fishing design, combining the performance expectations of serious anglers with the comfort and build quality Coastal Craft has developed over 25 years of aluminum yacht construction. Measuring 39 feet in length with a 10.92-foot beam and powered by twin 400-horsepower Mercury 400XXL/CXXL Verado outboards, this vessel delivers both the fuel efficiency and range for extended cruising and the speed capability needed for reaching distant fishing grounds. The welded marine-grade aluminum hull, Awlgrip paint finish, and meticulous interior millwork distinguish this ProFish 33 as a serious offshore platform designed for the discerning boater who values construction quality and thoughtful engineering. Coastal Craft's design philosophy centers on balancing performance with seaworthiness, and the 33 ProFish exemplifies that commitment. The vessel's aluminum construction provides the strength-to-weight advantage that enables efficient fuel consumption while maintaining structural integrity in demanding sea conditions. The forward-sloped windshield angle, stylish cabin brow, and hardtop overhang create the distinctive Coastal Craft profile recognized on the water, while the vessel's 2.17-foot draft and responsive handling characteristics make it accessible to a wide range of cruising and fishing destinations along the Pacific Northwest and beyond.
Hull Construction and Deck Design
The 33 ProFish's marine-welded aluminum hull and cabin are engineered for durability and longevity. Polyurethane foam insulation throughout the hull and cabin provides thermal efficiency and sound dampening, while the non-slip deck coatings and antifouling bottom paint with epoxy primers address both safety and maintenance needs. The Awlgrip topside paint—applied in silver hull with white cabin and boot stripe—provides professional-grade UV protection and aesthetic consistency. The aft cockpit spans 9 feet 6 inches long by 8 feet 6 inches wide, offering substantial working space for fishing operations. A starboard-side door and rear transom gate provide convenient crew access and fish-handling workflow, while port and starboard tackle lockers integrate tackle storage directly into the working area. The self-bailing cockpit design with deck scupper drains ensures water management during heavy seas or washdowns, and insulated cockpit deck hatches provide access to machinery and storage. Raw and fresh water washdown systems support both fishing cleanup and deck maintenance, with flood lighting controlled from the helm for nighttime operations. The swim deck features Flexiteek non-slip decking, creating a safe platform for boarding and water activities. Stainless steel hardware throughout—including nine 10-inch welded cleats, 1.25-inch bow handrails, and deck fittings—provides corrosion resistance and professional-grade durability. A 35-pound Delta anchor with 100 feet of chain and 300 feet of rope, managed through a Maxwell RC8 anchor windlass, supports secure anchoring in variable conditions. An aluminum 7-rod rocket launcher mounted on the cabin roof accommodates rigged fishing rods, while Burnewiin stainless steel universal flush deck mounts, a cutting board, and a Quality Northwest pot puller provide flexible mounting points for fishing accessories and equipment.
Fishing Systems and Cockpit Equipment
The 33 ProFish is purpose-built for offshore and coastal fishing, with integrated systems that support both live-bait and trolling operations. The cockpit design prioritizes angler workflow: tackle lockers on both sides of the aft cockpit provide immediate access to gear, while the self-bailing configuration allows extended fishing sessions without water accumulation. Two downrigger power points supply the electrical infrastructure for deploying weighted lines at depth, a critical feature for salmon and deep-water fishing in Pacific Northwest waters. The vessel includes a deck storage fish box with raw and fresh water wash-down capability, allowing proper preservation and cleaning of the day's catch. The insulated design and integrated drainage system maintain catch quality during extended fishing trips. The diaphragm pump dedicated to fish locker discharge simplifies the cleaning process without requiring manual water hauling. Burnewiin fishing accessories are integrated throughout the cockpit, including the GM650 universal flush deck mounts that provide a modular platform for rods, reels, bait systems, and other specialized fishing equipment. This modular approach allows owners to customize their fishing setup based on target species and fishing methods, whether pursuing salmon, halibut, or other Pacific species.
Helm and Navigation Electronics
The main helm console features hydraulic power steering with an Edson stainless steel steering wheel, providing responsive control across the vessel's speed range. The Shockwave S5 marine suspension base supports the helm seat, isolating the operator from vibration and impact during rough-water operations—a significant comfort feature during extended fishing days or challenging sea conditions. Navigation and fish-finding capability centers on a comprehensive Garmin electronics suite. Two Garmin 8616 marine chartplotters at the main helm provide redundancy and allow crew coordination, while a Garmin GMR Fantom 18 radar supports navigation and weather awareness. Airmar 50-kilohertz and 200-kilohertz thru-hull transducers feed sonar data to the chartplotters, enabling both traditional fish-finding and bottom mapping. A Garmin Reactor 40 autopilot reduces operator fatigue during longer passages, while a Garmin VHF 315 with GHS11 microphone and Morad antenna provides marine communication capability. The copilot area includes a Garmin GPSMap 922 marine chartplotter, allowing crew members to monitor navigation and sonar data independently. The aft cockpit station features a Garmin 8416 marine chartplotter mounted on an aluminum bulkhead console, enabling fishing crew to monitor sonar and navigation without leaving the working area. Twin-lever outboard engine controls with a 4-inch MercView screen provide intuitive throttle and trim management, while the Optimus 360 joystick docking system—installed at dual stations (helm and cockpit)—simplifies maneuvering in tight anchorages or alongside docks. The joystick system integrates with the outboard engine controls, allowing single-hand operation of both steering and throttle during precision docking.
Propulsion and Performance
Twin 400-horsepower Mercury 400XXL/CXXL Verado outboards in cold fusion white provide the power foundation for the 33 ProFish. The Verado platform is known for fuel efficiency, reliability, and modern electronic integration, with fully rigged controls and gauges supporting easy operation. Sharrow Marine MX propellers optimize thrust and efficiency across the vessel's operating range. The outboard electronic engine controls allow the Mercury Vessel View integration system to manage active trim, optimizing hull attitude and fuel consumption throughout the speed range. Zip Wake trim tabs (450mm) provide additional pitch control, allowing fine-tuning of the running attitude for comfort and efficiency. The Optimus 360 joystick docking system integrates with the outboard controls, translating joystick inputs into coordinated throttle and steering commands—a significant operational advantage for single-operator docking and close-quarters maneuvering. Performance specifications indicate a cruising speed of 33 knots and a maximum speed of 40 knots, making the 33 ProFish capable of reaching distant fishing grounds efficiently while maintaining the fuel economy necessary for extended offshore operations. The 330-gallon fuel capacity supports extended range, while the 66-gallon fresh water capacity provides adequate supply for crew and galley operations on multi-day trips.
Cabin and Interior Accommodations
The interior layout prioritizes comfort and functionality, with finishes that reflect Coastal Craft's attention to detail. Black walnut wood millwork, marble galley counters, and soft-touch ceiling panels create an inviting environment that balances nautical functionality with residential comfort. The forward stateroom features a V-berth with a 5-inch mattress and under-berth storage, accessed through a 20-inch deck hatch with screen and shade. Soft-touch walls and ceiling panels, three ceiling lights, and hull-side shelving create a comfortable sleeping space, while a port aft cabinet provides additional storage. The aft stateroom, located beneath the salon settee, provides a twin XL berth accessed via hatch and stairs. Soft-touch wall and ceiling panels and ceiling lights maintain the interior aesthetic, while a stainless steel pull-up bar provides an exercise option during extended cruises. The salon centerpiece is a walnut burl table with high-gloss finish and snap-on covers that include a storage bag for convenient stowage. The port side forward double seat and sett
Length
39 ft
Beam
10.92 ft'
Year
2020
Builder
Coastal Craft
Model
33 ProFish
Cabins
2
Max speed
40 kn kn
What makes the 2020 Coastal Craft 33 ProFish different from other 33-foot fishing boats on the market?
The 33 ProFish is built on a marine-welded aluminum hull with a strength-to-weight ratio that delivers both fuel efficiency and high performance. At 41 feet overall length with an 11-foot beam, it's one of the largest boats in its class. The design combines a forward-sloped windshield, stylish cabin brow, and cockpit hardtop that are signature Coastal Craft features. The interior features black walnut millwork, marble countertops, soft-touch wall panels, and a full galley with a three-burner cooktop and Isotherm refrigerator/freezer—amenities that set it apart as both a serious fishing platform and a comfortable cruising vessel.
How does the twin 400hp Mercury Verado outboard setup perform on the 2020 Coastal Craft 33 ProFish?
The twin 400hp Mercury 400XXL/CXXL Verado outboards deliver a maximum speed of 40 knots with a cruising speed of 33 knots. The boat carries 330 gallons of fuel, providing extended range for offshore fishing trips. The outboards are rigged with Sharrow Marine MX propellers and controlled through electronic engine controls with a 4-inch Mercview digital gauge display at the helm. The propulsion system is managed by Mercury's Active Trim system, which works in concert with the Zip Wake trim tabs for optimized performance and fuel efficiency across different sea conditions.
What electronics and navigation systems are installed on this 33 ProFish?
The boat is equipped with a comprehensive Garmin electronics suite: two 8616 marine chartplotters at the main helm, one 8416 chartplotter in the aft cockpit, a GPSMap 922 at the copilot station, a GMR Fantom 18 radar, Garmin VHF radio with GHS11 microphone, and a Garmin Reactor 40 autopilot. Thru-hull transducers include both 50kHz and 200kHz Airmar units for sonar capability. The dual Optimus 360 joystick docking systems—one at the main helm and one in the aft cockpit—allow precise boat control at both stations, critical for tight marina approaches and fishing positioning.
What stabilization and suspension systems improve comfort on the 2020 Coastal Craft 33 ProFish?
The boat is equipped with a SeaKeeper 3 gyroscopic stabilization system that reduces roll in open water, making extended offshore trips more comfortable for crew and passengers. At the helm, the Shockwave S5 marine suspension seat absorbs impact from wave action, reducing fatigue during long days of operation. The Zip Wake trim tabs (450mm) provide additional roll control and help maintain optimal running angle across varying sea conditions and fuel loads.
How is the cockpit configured for fishing, and what are its dimensions?
The aft cockpit measures 9 feet 6 inches long by 8 feet 6 inches wide, providing substantial working space for anglers. It features a self-bailing design with deck scupper drains to manage water during rough conditions. Starboard and port side tackle lockers offer organized storage for fishing gear. The cockpit includes a 7-rod Rocket Launcher mounted on the roof, Burnewiin flush-deck mounts (GM650 and GM400 composite), a Quality Northwest pot puller, and two downrigger power points. A hinged rear transom gate on the starboard side allows easy access to the swim platform. Raw and fresh water wash downs, an insulated fish box, and cockpit flood lights complete the fishing setup.
What interior accommodations does the 33 ProFish offer for overnight cruising?
The salon features a forward double seat with storage, a port-side settee with storage, black walnut wood finishes, soft-touch ceiling panels, and a walnut burl table with high-gloss finish. The forward stateroom contains a V-berth with a 5-inch mattress and under-berth storage, plus a 20-inch deck hatch with screen and shade. An aft stateroom tucked under the salon settee provides a twin XL berth with access stairs. The head includes a modified vanity with mirrored cabinet doors, solid surface countertop, electric toilet, and an overhead deck hatch with screen. A full galley with three-burner cooktop, Isotherm refrigerator/freezer, microwave, and watermaker test faucet supports extended cruising.
What helm station features and controls are available on this Coastal Craft?
The main helm station includes a Shockwave S5 marine suspension captain's seat mounted on a cabinet base, hydraulic power steering with an Edson stainless steel steering wheel, and a contoured switching panel. Twin electronic engine controls (lever style) connect to the Mercury Verado outboards, with a 4-inch Mercview digital gauge display for engine monitoring. The Garmin Reactor 40 autopilot integrates with two 8616 chartplotters for navigation. A secondary helm station in the copilot area includes a Garmin GPSMap 922 chartplotter and manual steering capability. The aft cockpit console features a third Garmin 8416 chartplotter, Optimus joystick docking, and twin lever engine controls, allowing full boat operation from the fishing platform.
What electrical systems and power management features support extended time on the water?
The boat carries four 6V house batteries with a battery monitor, two Meridian AGM 24 Series engine start batteries, and a 3000-watt 120V inverter/charger for the house bank. A ProNautic 10-amp charger maintains the start bank, while a Charles 30-amp isolation transformer provides shore power management via a 120V/30-amp connection with a 50-foot cord. Four AC outlets throughout the boat and three USB charging stations support modern electronics and devices. Two 2000-GPH automatic/manual bilge pumps with high-water alarm ensure safety, while a carbon monoxide and smoke detector add additional protection.
How does the construction and exterior finish quality of the 2020 Coastal Craft 33 ProFish compare to other aluminum fishing boats?
The hull is marine-welded aluminum with polyurethane foam insulation and non-slip deck coatings throughout. The bottom features antifouling paint with epoxy primers for corrosion protection. Topsides are finished in Awlgrip paint with silver hull, white cabin, and boot stripe detailing. All deck hardware and fittings are 316 stainless steel, including nine 10-inch welded cleats, 1.25-inch bow handrails, and a Maxwell RC8 anchor windlass with a 35-pound Delta anchor, 100 feet of chain, and 300 feet of rope. The cabin features anodized aluminum windows and doors with laminated safety glass, framed tinted side and rear windows, and a hinged rear door. Twelve-inch transom extensions with integrated drains protect the propellers and improve seaworthiness. Flexiteek non-skid covers the cockpit and swim platform.
What type of boater or fishing operation is the 2020 Coastal Craft 33 ProFish best suited for?
The 33 ProFish is designed for discerning boaters who want a serious offshore fishing platform with comfortable cruising accommodations. The twin 400hp Verado outboards, 330-gallon fuel capacity, and 33-knot cruising speed support multi-day offshore trips to productive fishing grounds. The full galley, two staterooms, and head with shower make it practical for crew or family overnight stays. The comprehensive Garmin electronics suite, dual Optimus joystick docking systems, and SeaKeeper stabilization appeal to operators who value precision boat handling and modern navigation. The aluminum construction, stainless steel hardware, and high-quality interior finishes suit buyers seeking a vessel that balances rugged fishing capability with refined comfort and low maintenance. It works equally well for serious anglers targeting pelagic species, charter operations, or families wanting a capable cruising platform with fishing versatility.

Fly Yachts is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Inside Passage Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel.

Similar yachts

More Coastal Craft yachts

See all Coastal Craft listings →

Editorial on Coastal Craft

Watch this boat

Not ready to talk yet? Leave your number — we'll personally alert you the moment the price moves or her status changes.

$649,000 Request a call
¿Habla español? (traducción automática)

Hablamos español

Déjenos su número y un broker de Fly Yachts le llamará — en español.